Whether you live in an apartment or have your own house, having a washer and dryer will make it much easier to keep your clothes clean and fresh. If your washer isn’t spinning, that can be problematic. You need those clothes clean so that you can get back to your normal life! Fortunately, there are several common fixes for this problem.

There are a few things that could be causing your washer not to spin. First, check to see if anything is blocking the washing machine from spinning. Any clothing or other items blocking the machine must be removed before they can spin.

Additionally, check to see if the washing machine is leveled. If it is not leveled, it may not be able to spin correctly. Finally, ensure the washing machine is properly plugged in and the power is turned on. If everything is in order and your washer still won't spin, you may need to call a maintenance specialist.

Quick Fixes 

• Check to see if there is an obstruction in the washer.
• Check to see if the washer is level.
• Check to see if the washer is properly plugged in.
• Check to see if the washer's lid is closed.
• Check the power supply
• Check if the door is closed
• Check that the water supply is turned on
• Check the hoses for kinks or blockages

 

Check the washer lid switch

The washer lid switch is responsible for turning on the wash cycle. If the switch is faulty, your washer won’t spin. You can test the switch by holding down the lid switch button while the washer is running. If the washer isn’t spinning while you’re holding down the button, the switch could be faulty. You can replace the lid switch by removing the washer lid, disconnecting the wiring harness, and removing the switch.

You can then connect the new switch and test it to ensure it works. If replacing the switch doesn’t fix the problem, your washer might need to be repaired. If you need to repair your washer, don’t forget that most home insurance policies cover appliance repairs. You can call your insurance company to see if they offer this service or check your policy for details on what’s covered. You might be able to get your washer fixed for less than you think!

 

Check the drum belt

The drum belt on your washer holds the agitator in place. Without it, the agitator won’t spin as it should. Sometimes, the drum belt will break and cause your washer to not spin. If that’s the case, you’ll need a new drum belt. You can find them at most hardware stores; just be sure to get the right one for your washer model. To install the new belt, you’ll first need to remove the old one.

Be careful when removing the belt because broken belt pieces can cause problems. Once the belt is off, you can install the new one by lining up the belt with the drum. You can use pliers to tighten the belt, so it stays in place. If the belt breaks, you can also manually spin the drum by hand. This will allow you to still use the washer, but it’s not a long-term fix. You’ll need to replace the belt as soon as possible.

 

Check your machine's drain hose.

If the machine is spinning, but the water isn't draining, the hose that connects to the drain may become clogged. Use a cleaning tool like a wooden spoon or chopstick to carefully dislodge any stuck particles. Any kinks or twists in the hose will also prevent the water from draining out of the machine, so make sure it isn't bent or tangled. If the hose is clogged or kinked, you can remove it and clean it with a hose-cleaning tool or by hand. Don't forget to check inside the hose for any clogs or obstructions.

 

Check the water level

If you’ve checked the drain hose and the drum belt and those aren’t the problems, the water level might be too low. To fix this, you can adjust the water level or add more water to the washer. The water level can be found on the inside of the washer door. To adjust the water level, remove the lid, open the door, and use the screw to adjust the water level.

You’ll want to ensure the water level is between the minimum and maximum levels, so your clothes get enough water to clean. You can also add more water to the washer if the level is too low. Be careful when you add water because you don’t want to overfill the washer. If you add too much water, you’ll have to drain some out to correct the water level.

Make sure nothing is preventing the tub from spinning

The machine is trying to spin the water out of the appliance, but the water isn't moving. Before pulling your hair out, check the following: Is there enough water in the machine? If not, you may have accidentally skipped the "add water" stage of the cycle or filled the machine too full. If the machine is overflowing, make sure that you have selected "normal" and not "heavy" or "pots and pans." If you are using rinse aid, ensure that you have added it correctly.

 

Your washer has a drain problem

If you’ve checked the above sections and your washer still won’t spin, you might have a drain problem. If the drain is blocked or clogged, your washer won’t spin; it won’t have anywhere to send the water. You can clean out the drain with a hose cleaner or a coat hanger. If the drain is blocked, you can unclog it by opening the drain. The drain is usually located on the front or back of the washer.

You can use a wrench to unclog or open the drain using a screwdriver or pliers. If your washer doesn’t have a drain, you can’t unclog it and the washer won’t spin. You’ll need to get a new washer.

 

Conclusion

Laundry is a necessary evil of living in a home. If your washer won’t spin, that can be problematic. Luckily, there are several quick fixes for this problem with the washer not spinning. You can check the drain hose, the drum belt, the water level, the washer lid switch, and the washer has a drain problem. These are the most common fixes for when your washer won’t spin